跟着工业高速开展,工业排放的废气所造成的大气污染越来越严峻。工业废气主要有二氧化碳、二硫化碳、硫化氢、氟化物、氮氧化物、氯、氯化氢、一氧化碳、硫酸(雾)、烟气、粉尘、丙酮、丁酮、苯、甲苯、二甲苯等苯系物有机废气。
With the rapid development of industry, the air pollution caused by industrial waste gas is becoming more and more serious. Industrial waste gas mainly includes carbon dioxide, carbon disulfide, hydrogen sulfide, fluoride, nitrogen oxide, chlorine, hydrogen chloride, carbon monoxide, sulfuric acid (FOG), flue gas, dust, acetone, butanone, benzene, toluene, xylene and other benzene series organic waste gas.
工业废气作为大气污染的重要来历,工业废气治理尤为重要,由于工厂出产的工艺不同,工业废气发生的废气污染物品种也不同,针对不同类型废气污染物应选用不同的废气处理工艺,今天小编给大家介绍工业废气处理需要留意哪些问题。
Industrial waste gas as an important source of air pollution, industrial waste gas treatment is particularly important. Due to the different processes produced by factories, the types of waste gas pollutants produced by industrial waste gas are also different. Different waste gas treatment processes should be selected for different types of waste gas pollutants. Today's small edition introduces what problems should be paid attention to in industrial waste gas treatment.
工业废气处理需要留意问题工业废气处理类型大致可分为可燃气体的处理、助燃气体的处理、毒性气体的处理、惰性气体的处理。可燃气体的处理,可燃气体的排放,假如排放量较大,应尽或许挑选人少的当地,留意周围制止火,并备有相应的灭火器、砂子和水。
Industrial waste gas treatment needs attention. The types of industrial waste gas treatment can be roughly divided into combustible gas treatment, combustion supporting gas treatment, toxic gas treatment and inert gas treatment. For the treatment of combustible gas and the discharge of combustible gas, if the discharge is large, select the place with few people as far as possible, pay attention to the surrounding area to stop the fire, and provide corresponding fire extinguisher, sand and water.
排放钢瓶中的可燃气体,工作人员应站在出气口的旁边面进行操作,以防气体喷出伤人。选用焚烧法处理时,应装置减压阀,控制可燃气的速度,尽量使气体渐渐放出,使之在焚烧装置内充沛焚烧掉。助燃气体的处理将黏着在容器阀门上或运用器具上的粉末、石油类、油脂类及可燃性物质,底清除干净后,方可进行助燃气的处理。
When discharging the combustible gas in the cylinder, the staff should stand at the side of the gas outlet to prevent the gas from ejecting and injuring people. When the incineration method is adopted, the pressure reducing valve should be installed to control the speed of combustible gas, so as to make the gas release gradually, so that it can be fully incinerated in the incineration device. For the treatment of combustion supporting gas, the powder, petroleum, grease and combustible substances adhered to the container valve or appliance can be treated only after the bottom is cleaned.
以上就是处理工业废气需要注意的问题,希望上述内容对大家有所帮助。
The above is the treatment of industrial waste gas need to pay attention to the problem, I hope the above content to help you.